NOISE GENERATORS
BBGen
100 kHz - 5 GHz noise generator, PCB sub assembly, typically 24 dB* ENR
Extremely flat output. (*24 dB ENR = -90 dBm/MHz, so e.g. -110 dBm in 10 kHz bandwidth)
Datasheet pdf Application note AN-1 pdf
Also available (/box) in screened enclosure with high quality Tusonix feed-through DC filter.
BBGen GBP £55.00 plus shipping.
BBGen/box GBP £90.00 plus shipping.
100 kHz - 5 GHz noise generator, PCB sub assembly, typically 24 dB* ENR
Extremely flat output. (*24 dB ENR = -90 dBm/MHz, so e.g. -110 dBm in 10 kHz bandwidth)
Datasheet pdf Application note AN-1 pdf
Also available (/box) in screened enclosure with high quality Tusonix feed-through DC filter.
BBGen GBP £55.00 plus shipping.
BBGen/box GBP £90.00 plus shipping.
BBGen-pulse
100 kHz - 5.5 GHz noise generator, screened and filtered, 5Hz pulse mode, typically 21 dB* ENR
Extremely flat output. (*21 dB ENR = -93 dBm/MHz, so e.g. -113 dBm in 10 kHz bandwidth)
Datasheet pdf
GBP £99.00 plus shipping.
Need a higher level?
See the amplifiers on the LNA product page.
100 kHz - 5.5 GHz noise generator, screened and filtered, 5Hz pulse mode, typically 21 dB* ENR
Extremely flat output. (*21 dB ENR = -93 dBm/MHz, so e.g. -113 dBm in 10 kHz bandwidth)
Datasheet pdf
GBP £99.00 plus shipping.
Need a higher level?
See the amplifiers on the LNA product page.
BBGen+
20 kHz - 6 GHz noise generator, PCB sub assembly, typically 44 dB* ENR at 430 MHz
Ultra wideband. (*44 dB ENR = -70 dBm/MHz, so e.g. -90 dBm in 10 kHz bandwidth)
Please note ... the BBGen+ output power density maybe too low for your application? Please check.
The BBGen+ data sheet frequency characteristic graphs are dB (relative) and NOT dBm.
If you are in any doubt please don't hesitate to contact us for advice.
Datasheet pdf
Also available (/box) in screened enclosure with high quality Tusonix feed-through DC filter.
BBGen+ GBP £65.00 plus shipping.
BBGen+ /box GBP £99.00 plus shipping.
20 kHz - 6 GHz noise generator, PCB sub assembly, typically 44 dB* ENR at 430 MHz
Ultra wideband. (*44 dB ENR = -70 dBm/MHz, so e.g. -90 dBm in 10 kHz bandwidth)
Please note ... the BBGen+ output power density maybe too low for your application? Please check.
The BBGen+ data sheet frequency characteristic graphs are dB (relative) and NOT dBm.
If you are in any doubt please don't hesitate to contact us for advice.
Datasheet pdf
Also available (/box) in screened enclosure with high quality Tusonix feed-through DC filter.
BBGen+ GBP £65.00 plus shipping.
BBGen+ /box GBP £99.00 plus shipping.
XGen
5 GHz - 12 GHz noise generator, PCB sub assembly, typically 20 dB* ENR
Ultra wideband. (*20 dB ENR = -94 dBm/MHz, so e.g. -114 dBm in 10 kHz bandwidth)
Datasheet pdf XGen flatness test note pdf
XGen GBP £60.00 plus shipping.
XGen/box GBP £95.00 plus shipping. (includes enclosure resonance absorber)
5 GHz - 12 GHz noise generator, PCB sub assembly, typically 20 dB* ENR
Ultra wideband. (*20 dB ENR = -94 dBm/MHz, so e.g. -114 dBm in 10 kHz bandwidth)
Datasheet pdf XGen flatness test note pdf
XGen GBP £60.00 plus shipping.
XGen/box GBP £95.00 plus shipping. (includes enclosure resonance absorber)
RXGen
2 MHz - 2.4 GHz receiver test source, 10 dB ENR +/-0.5 dB accuracy
Graphs are supplied for both noise figure measurement and uV equivalent S/N in 2.4 kHz SSB BW
Datasheet pdf Application note AN-2 pdf RXGen vswr plots here
RXGen compared to HP 346B (+5dB attenuator), HF ... 2.5 GHz pdf
RXGen-box GBP £115.00 plus shipping
RXGen-sma (PCB sub assembly) GBP £80.00 plus shipping
2 MHz - 2.4 GHz receiver test source, 10 dB ENR +/-0.5 dB accuracy
Graphs are supplied for both noise figure measurement and uV equivalent S/N in 2.4 kHz SSB BW
Datasheet pdf Application note AN-2 pdf RXGen vswr plots here
RXGen compared to HP 346B (+5dB attenuator), HF ... 2.5 GHz pdf
RXGen-box GBP £115.00 plus shipping
RXGen-sma (PCB sub assembly) GBP £80.00 plus shipping
About our noise generators ...
In recent years a number of noise generator products have become available from mainly Asian vendors at very attractive prices.
Here is a short list of noise generator features that may help in your selection of the right source for your application:
With our instruments we like to think you very much get what you pay for, professional grade products at reasonable prices!
In recent years a number of noise generator products have become available from mainly Asian vendors at very attractive prices.
Here is a short list of noise generator features that may help in your selection of the right source for your application:
- Flatness and spurious responses. All RFD noise sources are spurious free and most are designed for flatness, or a defined and stable output characteristic. Low cost sources in general are poor in these areas.
- Short term stability. RFD noise semiconductors were selected as part of an 18 month development project in 2001. Whilst a noise generator circuit is very simple, stable operation over temperature and time is not easily achieved. Low cost sources in general use diodes for maximum output, not stability.
- Long term stability. We have built, calibrated and supplied a large number of sources since 2001. We have real time ageing data from life tests. Our noise sources demonstrate much superior characteristics day to day and year to year than low cost sources.
- Output match. Our sources are specified for output VSWR. Low cost sources in general have poorly defined source impedance.
- Component quality. All our products use traceable high quality components, low cost sources in general score very poorly on component quality.
- Life long owner support by email, helping you with your measurements. Low cost sources, probably no support!
With our instruments we like to think you very much get what you pay for, professional grade products at reasonable prices!
To place an order, please complete the form below.
We will reply with an invoice, secure payment link and shipping date.
All major cards accepted. A PayPal account is not required.
Shipping charges here
We will reply with an invoice, secure payment link and shipping date.
All major cards accepted. A PayPal account is not required.
Shipping charges here